ОБЛАДНАННЯ ДЛЯ ЗАПОБІГАННЯ ПОШИРЕННЮ КОРОНАВІРУСУ SARS-COV-2. ДОСЛІДЖЕННЯ РОЗДІЛОВИХ ЕЛЕМЕНТІВ

Заголовок (англійською): 
EQUIPMENT TO PREVENT THE SPREAD OF CORONAVIRUS SARS-COV-2. RESEARC OF SEPARATION ELEMENTS
Автор(и): 
Chun Xiang Huang
Liling Xia
Ryzhkov Sergiy
Ключові слова (укр): 
аерозольні градієнтні технології; обладнання для розділення; градієнтне поле; ресурсна та екологічна безпека
Ключові слова (англ): 
aerosol gradient technologies; separation equipment; gradient field; resource and environmental safety
Анотація (укр): 
Поєднання пропонованих методів допоможе розробити фотокаталітичне й ультразвукове обладнання для розділення тепла та маси для очищення повітря від пилу, вірусів, запобігти поширенню коронавірусу SARS-COV-2. Обладнання розраховане на об’єм повітря G = 50… 150 м3/год, має зменшити ступінь мікробного забруднення повітря до необхідного рівня (захоплення частинок 0,1 мкм) та сприяти зменшенню ризику захворювань, що передаються повітрям. Проєкт розглядає вирішення важливої науково-технічної проблеми створення та розвитку фотокаталітичного й ультразвукового обладнання для розділення тепла та маси для очищення повітря від пилу та вірусів (коронавірус SARS-COV-2). Технології поділу та пристрої, що їх використовують, здатні проводити очищення від частинок розміром понад 0,10 мкм з ефективністю до 99%.
Анотація (англ): 
The aim of the work is to develop separation elements for photocatalytic and ultrasonic equipment for air purification for infectious safety of buildings from coronavirus SARS-COV-2. The equipment is designed for air volume G = 50… 150 m3 / hour, should reduce the degree of microbial contamination of the air to the required level (capture particles of 0.1 μm) and help reduce the risk of airborne diseases. Project considers solving an important scientific and technical problem of creating and development of photocatalytic and ultrasonic heat and mass transfer separation equipment for air clean from dust and viruses (coronavirus SARS-COV-2). The separation technologies and the devices employing them are able to perform purification from particles with the size exceeding 0.10 μm with the efficiency up to 99 %. Combination of this methods will help to develop photocatalytic and ultrasonic heat and mass transfer separation equipment for air clean from dust, viruses and to prevent coronavirus SARS-COV-2 spread.
Публікатор: 
Київський національний університет будівництва і архітектури
Назва журналу, номер, рік випуску (укр): 
Управління розвитком складних систем, номер 46, 2021
Назва журналу, номер, рік випуску (рус): 
Управление развитием сложных систем, номер 46, 2021
Назва журналу, номер, рік випуску (англ): 
Management of Development of Complex Systems, Number 46, 2021
Мова статті: 
English
Формат документа: 
application/pdf
Документ: 
Дата публікації: 
24 Май 2021
Номер збірника: 
Розділ: 
УПРАВЛІННЯ ТЕХНОЛОГІЧНИМИ ПРОЦЕСАМИ
Університет автора: 
Yancheng Polytechnic College, Institute of Intelligent Manufacturing, Yancheng, China; Yancheng Polytechnic College, International Academy of Marine Science, Technology and Innovation, Yancheng, China
Литература: 
  1. Kalvert S., Inglund G. M. (1988). Atmosphere protection from industrial pollution: reference book, part 1. Moscow, Metallurgiya Publ., 760.
  2. Kalvert S., Inglund G. M. (1988). Atmosphere protection from industrial pollution: reference book, part 2. Moscow, Metallurgiya Publ., 770.
  3. Sazhin, T. M., Krechun, K. N., Botez, N. (2003). NOx and SO2 retention out of flue gases in electric fields. Industrial heat engineering, 4, 193–196.
  4. Straus, V. (1981). Industrial gas cleaning. Moscow, Khimiya Publ., 583.
  5. Hall, D. E., King, D. B., Morgan, T. B. (1998). A review of recent literature investigating of the measurement of automotive particulate; the relationship with environment aerosol, air quality and health effect. Ibid, 982602, 53–65.
  6. Ryzhkov, S. S. (2001). Ship complex installation of clearing oil mixture of water. Proceedings of the third international conference on marine industry. Varna, 2001, vol. 2, pp. 285–288.